|
|
Use of biomarkers for assessing environmental pollution by platinum group metals
Nedvědická, Lucie ; Řezáčová, Veronika (referee) ; Komendová, Renata (advisor)
This diploma thesis in the theoretical part analyses the characteristic feature of individual platinum group elements, their toxicity, anthropogenic sources and the presence of platinum group elements in the environment of the Czech Republic. In addition, there are specified types of bioindicators focusing mainly on lichens, mosses and needles. There are described individual bioindication techniques and pre-treatment of samples for platinum metals determination in bioindicators. The subject of the experimental part is to verify the sorption efficiency and ability of platinum and palladium using the SPE method and to determine the actual platinum metal contamination in selected localities in the city of Brno. There was also the additionally subject to verify the sorption potential of selected bioindicators and determination of the environmental pollution by platinum metals using the bag technique. In the experimental part, the bioindicators of moss Pleurozium schreberi, lichen Xanthoria parietina, lichen Flavoparmelia caperata and needles Pinus nigra were used.
|
|
|
QUANTUM MECHANICAL STUDY OF PHASE STABILITY IN METALLIC SYSTEMS
Káňa, Tomáš ; Vřešťál, Jan (referee) ; Paidar,, Václav (referee) ; Černý, Miroslav (referee) ; Šob, Mojmír (advisor)
This work presents a theoretical study of stability of phases in selected metallic systems. We propose a model of structural transformations in transition metal disilicides MoSi2, CrSi2, VSi2 and TiSi2 and in Pd thin films grown on cubic substrates W(001) and Nb(001). The obtained results yield the total energy proles for the structural transformations studied, the activation energies needed for each individual transformation and an estimate of the temperature at which the structure can transform. The total energies are calculated by full-potential linearized augmented plane waves (FLAPW) method incorporated in the WIEN2k code. Both generalized gradient approximation (GGA) and local density approximation (LDA) are employed for the exchange-correlation term. It turns out that temperatures corresponding to the activation energies of structural transformations in transition metal disilicides exceed their melting temperatures. Comparing the resulting total energy proles to those obtained by the semiempirical Bond Order interatomic potentials (BOP) substantially helps to adjust the fitting parameters of the BOPs. The estimated temperature of 168 K needed to transform the hcp structure of an innite Pd crystal into the dhcp structure explains the behavior of the Pd thin lm on W(001) and Nb(001) substrates. Pd lms deposited on W(001) substrate and thicker than about 100 monolayers undergo this transformation already at room temperature. Thinner lms need to be annealed at 400 K rst, due to their stronger interaction with the substrate. The difference between the computed result and a real temperature at which the hcp Pd lm transforms its structure to the dhcp can be explained by both the interaction between the lm and the substrate and by the inuence of the domain topology of the lm. Analyzing different models of transformation of the initial hcp Pd structure to the ground state fcc structure, we identied the optimum model that respects the domain topology of the Pd lm.
|
|
| |
|
|
The use of SPE methods for determination of ultratrace concentrations of platinum metals in environmental matrices
Ježek, Stanislav ; Zlámalová Gargošová, Helena (referee) ; Gregor, Tomáš (referee) ; Komendová, Renata (advisor)
This dissertation is focused on the study of sorption techniques for the determination of platinum and palladium on modified solid sorbents and ion exchangers. The final determination was made using atomic absorption spectrometry with electrothermal atomization (ET-AAS). Six modified sorbents were selected for the sorption study. Four modified non-polar silica gels were studied and two sorbents were based on styrene divinylbenzene copolymer. Furthermore, three cation exchange resins and three anion exchange resins were studied. The sorption efficiency of platinum and palladium was studied with modified sorbents and anion exchange resins. Furthermore, the influence of interfering elements (Fe, Cu, Zn, Pb, K, Na, Ca and Mg). Another parameter for evaluating the effectiveness of sorbents is the volume of the elution mixture required for effective elution of platinum and palladium from the sorbents. Based on the results, a sorbent was selected for the preconcentration of platinum and palladium from real environmental samples from the environment. The study of the concentration of platinum and palladium in environmental components is divided into two parts. The first part compares two cities with different sizes and vehicle concentrations. It is a regional capital in the Czech Republic – Jihlava and the capital of Austria – Vienna. For soil matrix sampling, locations near frequent traffic junctions were selected. In Jihlava, the concentration of platinum ranged from 16.93 to 38.72 ng.g-1 and for palladium from 2.705 to 8.452 ng.g-1. In Vienna, the detected concentrations were higher. Platinum concentrations ranged from 39.22 ng.g-1 to 159.2 ng.g-1 and for palladium from 18.45 ng.g-1 to 98.21 ng.g-1. The second part was focused on the busiest traffic junction in the Czech Republic - the D1 highway, focusing on the section near the Švihov water reservoir, which serves as one of the main sources of drinking water for the capital of the Czech Republic - Prague. Rain retention tanks - "lapolas" - are installed in this section. A soil sample was always taken in the vicinity of these lapolas, and from the lapolas the sediment in the reservoir and settled water at the outlet from the reservoir. These rain retention tanks proved to be suitable places for monitoring pollutants from automobile traffic.
|
|
|
Determination of palladium by ET-AAS after previous preconcentration by solid phase extraction
Hajdová, Jana ; Čelechovská, Olga (referee) ; Komendová, Renata (advisor)
The theoretical part of this master’s thesis focuses on the characteristic of Palladium, his uses in the automotive convertors, the occurrence in the environment, bioaccumulation and human health risks. Next there are described the basics of biomonitoring and summarize suitable biomonitoring method for capturing airborne dust. There are also evaluated appropriate methods for preconcentration and determination of Palladium. The aim of experimental part of this thesis is description and evaluation optimalization preconcentration method SPE by using sorbents silicagel C18 and QuadraSil TA. Optimization of method conditions of electrothermal atomic absorption spectrometry (ET – AAS). The determination of Palladium using optimal conditions follows in real samples in the form of exposure lichen (Hypogymnia physodes) by automobile traffic in Brno.
|
|
|
Palladium in the environment
Hajdová, Jana ; Řezáčová, Veronika (referee) ; Komendová, Renata (advisor)
This work is focused on palladium in the environment. Its use is especially in the automobile industry as catalytic converters of motor vehicles, but also is applied in dental, jewelry making and electrical appliances. The release of this metal from automobile catalysts is getting into all environmental compartments (soil, road dust, water, plants), where goes to its accumulation. It can be a part of the food chain and cause health risks to humans. The work also focuses on methods of sampling, preconcentration and methods, which can determined palladium in environmental samples (spectrophotometric methods, AAS, ICP-AES and ICP-MS).
|
|
|
Investments of the Automotive Industry in Precious Metals as Strategic Materials
Dvořáček, Martin ; Plíhal, Tomáš (referee) ; Rejnuš, Oldřich (advisor)
The subject of the thesis is the investment recommendations of companies operating in the automotive industry to purchase strategic raw materials, such as in particular platinum, palladium and rhodium. Thesis include a theoretical description of the topic, respectively certain forms of hedging, instruments used to hedge and brief characteristics of precious metals. Analytical and proposed section of the thesis contains specific methods, procedures and its own approach used to meet the global target of thesis.
|
|
|
Platinum group elements in waste and surface waters
Novotný, Matěj ; Řezáčová, Veronika (referee) ; Komendová, Renata (advisor)
This assignment provides a detailed description of platinum metals, their occurrence in surface and waste water and their determination options. Currently, platinum metals are widely used in the automotive industry as a part of a catalyst, as well as in medicine and jewelery. Release of these metals in pure form and the form of oxides leads to their subsequent accumulation, which directly affects fauna and flora. Due to that, the living conditions and health status of some organisms are petting worse.
|
|
|
Study of contamination of river sediments with platinum metals
Novotný, Matěj ; Řezáčová, Veronika (referee) ; Komendová, Renata (advisor)
This work deals with the characteristics of platinum metals and problems related to their toxicity and mobility in the environment, especially in the aquatic environment. These metals are released into the environment due to the use of automotive catalysts. Their function is based on the catalytic properties of platinum metals. Because of the high temperatures, these metals can be oxidized in the catalyst and subsequently emitted together with the combustion products into the surrounding atmosphere. The aim of the thesis is to measure real samples of river sediments of the river Svratka on the territory of the city of Brno and to find the possibility of contamination of the aquatic environment with these metals.
|
|
|
Palladium catalysts deposited over novel siliceous supports
Křečková, Pavlína ; Štěpnička, Petr (advisor) ; Sedláček, Jan (referee)
Title: Palladium catalysts deposited over novel siliceous supports Author: Pavlína Křečková Department: Department of Inorganic Chemistry, Faculty of Science, Charles University in Prague Supervisor: prof. RNDr. Petr Štěpnička, Ph.D. Supervisor's e-mail address: stepnic@natur.cuni.cz Advisor: prof. Ing. Jiří Čejka, DrSc. Advisor's e-mail address: jiri.cejka@jh-inst.cas.cz Abstract Keywords: palladium; deposited catalysts; siliceous supports; C-C coupling reaction. The aim of this work was to prepare a deposited palladium catalyst from Pd2+ and twodimensional zeolite ITQ-2 bearing ≡SiCH2CH2CH2NHCH2CH2NEt2 groups at the surface. This catalys has been evaluated in the Heck reaction between n-butyl-acrylate and brombenzene to give n-butyl-cinnamate. Influence of the reaction temperature, the solvent, base and hydrate water on the progress of the Heck reaction was investigated. This work also deals with the possibility of recycling the catalyst and, due to its nature, with the quantity of leached palladium into the reaction mixture. Furthermore, the work describes differences in morphology between the fresh and a recycled catalyst.
|
guest ::
